B&B Electronics McPC MediaLinX Specifications download pdf (Page 39)

Visit www.imcnetworks.com or www.mediaconverter.com

Call 1-800-624-1070 for more information.

Ordering Information

888.948.2248 | www.bb-elec.com / www.imcnetworks.com

A Compact, Versatile, SNMP Manageable

Gigabit Ethernet Device That Offers internal

and redundant powering options.

IE-iMcV-MultiWay

Product Overview

The IE-iMcV-MultiWay is a modular, CPE device providing two fixed

10/100/1000Base-T copper ports and 2 SFP ports. The SFP ports

support fiber or copper SFPs. A console port and on-board DIP

Switches provide configuration and mode options for the module.

The IE-iMcV-MultiWay provides OAM functionality with 802.3ah and

802.1ag support on each port. As an Industrial Ethernet device, it

supports an extended temperature range of -40° to +85° C.

There are four distinct DIP Switch selectable configurations that the

IE-MultiWay supports. Among them are a 1+1 Uplink Protection Switch,

a 4-Port Gigabit Switch, and a Dual Copper to Fiber SFP Media/Mode

Converter (two gigabit fiber media converters in one).

As a 4-port device, it can be deployed with fiber redundancy (with or

without 1+1 uplink protection) and status monitoring with management

on all ports via SNMP, which offers OAM for mission-critical applications.

It can also be installed as dual 10/100/1000 Mbps copper to fiber media

converter and be utilized as two separate converters.

The IE-iMcV-MultiWay supports 10/100/1000 Mbps and 1 Gbps copper

and 100 Mbps and 1 Gbps optical SFP modules, to provide greater

flexibility in the network environment. The hot-swappable nature of

SFPs and the numerous fiber modes and types that are available

allow for easy configuration and future upgrading as network demands

evolve.

The IE-iMcV-MultiWay offers a full feature set including Auto Negotiation,

Selective Advertising, AutoCross (on copper ports), VLANs, loopback

testing and OAM. Software updates can be downloaded through TFTP

or iView2 (iConfig view).

Features

Flexible Solution

• Copper to fiber SFP media converter

• Dual-independent copper to fiber SFP media

converter(s)

• Fiber repeater

• SFP to SFP mode converter with copper drops

(Re-amplify, Re-shape, Re-time)

• 4-Port Gigabit Switch

• 1+1 uplink protection (<50 mSec)

• Supports per port service VLAN

• Supports daisy chain expansion

• Supports RMON Statistics

• Supports Jumbo Frames (up to 10240 bytes)

• Modular form factor

Advanced Remote Monitoring/Management

• Supports IEEE 802.3ah OAM (active/

passive), and 802.1ag CFM (Connectivity Fault

Management) and Y.1731 on all ports

• Discovery, Link Monitoring, Performance

Monitoring and Remote Loopback

• Bandwidth Limiting with burst capability and

priority queuing

• Rate Limiting can be done at Layer 1, 2 or 3

• Via UMA, can act as a Remote when connected

to a Host iMcV-Giga-FiberLinX-II

• Generates SNMP TRAPs based on events

• RS-232 CLI (Command Line Interface) console

port

SFP Support

• Auto negotiate speed and flow control for

10/100/1000 copper SFPs with SGMII

• Supports fixed speed 1 Gbps full-duplex copper

SFPs

• Auto detect for 100 or 1000 optical SFPs

“Industrial Ethernet” (IE) Features

• Extended temperature functionality, up to -40°

to +85° C

• Powering options include redundant internal AC

powered chassis

Managed Auto Cross

Auto

Negotiation

Fiber Alert

FIBER

LOS

LINK

Link Loss

LOS

In the following example, three separate IE-iMcV-MultiWay’s

installed in single-slot AC chassis are connecting multiple

kiosk’s in a ring-type network utilizing a Spanning Tree

enabled switch. The ring topology provides redundancy

to the network. If a fiber break were to occur somewhere

along any segment, the spanning tree protocol provides an

automatic backup link.

Application Example

858-18121

IE-iMcV-MultiWay Module, 2TX/2SFP, Various

* IE-iMcV-MultiWay

Physical Specifications

Fiber Types Supported

• SFP

Connectors:

RJ-45, 2 SFP

Regulatory Approvals:

• FCC Class A

• UL, cUL, CE

Operating Temperature:

-40° F to +185° F (-40° C to +85° C)

Storage Temperature:

-67 F to +257° F (-55° C to +125° C)

Humidity:

5 to 95% (non-condensing)

Altitude:

0 to 10,000 ft.

Dimensions

4.19”H x 0.78”W x 2.75”D (10.74 x 2 x 7.05 cm)

Shipping Weight:

0.30 lbs (.11 kg)

Ordering Information

Use with Chassis Platform

iMediaChassis Series, See Page 45

MediaChassis Series, See Page 46

IE-MediaChassis Series, See Page 46

NEW!

* SFPs Sold Separately

Also available in a compact Stand-alone version.

See page 4 for details

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Comments to this Manuals

No comments

B&B Electronics McPC MediaLinX Specifications Page 39

Comments to this Manuals