B&B Electronics 3PCIOSD1B User Manual Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 27
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Documentation Number 3PCIOSD1x-3903m Manual Chapter 3 13
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445
Chapter 3: WINDOWS INSTALLATION
Windows 95 and Windows 98
Any prior installation using previous B&B serial drivers must be
removed before installing the new drivers. (Refer to page 20.)
Windows 98 screens are shown for this section. Windows 95 is a bit
different with fewer steps and the screen names and text shown
differs. Windows 95 differences are noted (W95:…)
1. Configure the port on the PCI card to the desired RS-
232/422/485 mode using the jumpers.
2. Install the card in the slot. Start the computer.
3. Windows will detect the PCI card, start the Add New Hardware
Wizard, and begin driver installation. When installation is
complete, Windows will set the hardware addressing & interrupt
using the drivers and the Plug and Play function of the
Operating System.
4. The driver installation proceeds in two parts. The first part
installs the driver for the PCI Serial card. The second part
installs the serial driver for the Com Port A (Port A=Port 1).
NOTE: The Optically Isolated 3PCIOSD1 PCI Serial Adapter card
will be identified as the 3PCISD1 PCI Serial Adapter, both cards use
the same drivers and are functionally the same to the Operating
System.
14 Chapter 3 Documentation Number 3PCIOSD1x-3903m Manual
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104
B&B Electronics Ltd – Westlink Comm. Pk. – Oranmore, Galway, Ireland – Ph 353-91-792444 – Fax 353-91-792445
5. After new hardware is detected, this screen will appear. (W95:
This screen is named Update Device Driver Wizard).
6. Click Next to continue. (W95: Insert the Driver Disk in Drive,
then click Next - skip to step 9)
7. Click Next.
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 26 27

Comments to this Manuals

No comments